Capabilities

CNC machining, one-off to batch.

Milling, turning and inspection under one roof in Bengaluru. Send a drawing and we’ll tell you how we’d make it, what it costs and when it ships.

CNC-milled aerospace bracket with the Tenaxis mark

01 · Milling

CNC milling

For prismatic and multi-face parts: pockets, profiles, slots, bores and threaded holes, machined from billet or plate.

Housings, enclosures and covers
Brackets, plates and mounting blocks
Manifolds and valve bodies
Jigs, fixtures and tooling

Tolerance: ±0.001″
Max envelope: X × Y × Z mm
Materials: Plastics → Ti

CNC-turned titanium flange with the Tenaxis mark

02 · Turning

CNC turning

For round parts where concentricity and finish matter: turned, grooved, threaded and drilled in as few set-ups as possible.

Shafts, pins and spindles
Bushes, sleeves and spacers
Threaded fittings and connectors
Flanges, collars and rings

Tolerance: ±0.001″
Max diameter: Ø ___ mm
Max length: ___ mm

CMM touch probe measuring a machined part on a granite surface plate

03 · Inspection

Inspection and documentation

Every order is checked against your drawing before dispatch. Every part is measured and recorded, and the full inspection paperwork ships with every order.

First-article inspection
In-process checks during the run
Final dimensional inspection
Inspection report with every order

Reports: Every order
Material certs: Every order
Traceability: Every part

Materials

Plastic to aero‑grade titanium.

These are the grades we see most. Send your spec if yours isn’t listed.

Engineering plastics

Light, insulating, low friction.

Delrin (POM)
Nylon
PEEK
PTFE
Acrylic

Aluminium

Light, stable and quick to machine.

6061-T6
6082
7075-T6
2024
5083

Carbon, alloy and tool steel

Strength, toughness and wear resistance.

EN8
EN24
EN31
D2
H13

Stainless steel

Corrosion resistant and hard-wearing.

SS 304
SS 316 / 316L
SS 410
17-4 PH

Copper alloys

Conductive, machinable, clean finish.

Brass
Copper
Phosphor bronze

Titanium

Aerospace-grade strength at low weight.

Grade 2
Grade 5 (Ti-6Al-4V)

Tolerances

One standard, in every unit.

Drawings arrive in inches and millimetres. Here’s how our tightest standard tolerance converts.

Inch

±0.001″

Thou / mil

±1 mil

Millimetre

±0.0254 mm

Micron

±25.4 µm

Equipment

The machines behind the parts.

Every part we ship is programmed, machined and measured on this equipment.

Tenaxis Group machine list
Machine	Process	Axes	Working envelope	Qty
Make and model	Vertical machining centre	3 / 4 / 5	X × Y × Z mm	–
Make and model	CNC turning centre	2 / live tool	Ø × L mm	–
Make and model	Inspection	–	Range	–

Quoting

What to send us

The more we know up front, the faster and more accurate the quote. If you only have some of this, send it anyway.

Start a quote

3D model: STEP, IGES or Parasolid
2D drawing: PDF or DWG/DXF, with tolerances
Material and grade
Quantity, and whether it’s a one-off or repeat order
Finish or treatment, if any
When you need the parts